Product Description:

The AKM22C-ANB2R-00 is a synchronous servo motor manufactured by Kollmorgen for the AKM Synchronous Servo Motors series. Designed for closed-loop speed and position control, the unit supplies cyclic torque to conveyors, pick-and-place axes, and light gantry stages where accurate motion and rapid response are required. When paired with a compatible servo drive, it can support repeatable starts, stops, and short indexing moves while maintaining stable motion under changing loads. Its compact housing fits tight mechanical envelopes, and the customization level is Standard, so the motor is supplied with the regular mechanical interfaces and winding arrangement for this configuration.

A factory-installed 24 V holding brake secures the shaft when power is removed, allowing vertical or suspended loads to remain stationary without external clamps. Field wiring is completed through two SpeedTec Ready connectors that use bayonet locking for quick connection and consistent shielding. Rotor position feedback is generated by a resolver, and the two-pole feedback device supports noise-immune commutation at typical servo bandwidths. The motor uses a 58 mm frame width and a smooth shaft, which helps keep inertia low and supports coupling with collets or clamp hubs without keyway stress concentrations.

Mechanical alignment to gearboxes or fixtures follows an IEC flange with accuracy N, giving predictable concentricity during assembly. Winding code C corresponds to balanced voltage and current demands on 230 V-class drives, while rotor length index 2 provides a mid-range continuous torque within this frame size. The feedback system operates as single-turn inductive position sensing, which tolerates high temperatures and vibration without unstable signal behavior. This arrangement suits compact servo installations that require dependable feedback and steady operation through repetitive motion cycles.