Product Description:

The AKM12C-ANMN2-00 is a brushless servo motor manufactured by Kollmorgen and positioned within the AKM Synchronous Servo Motors series. Designed for integrated servo drive architectures, it converts electrical power into tightly controlled rotary motion for indexing tables, pick-and-place units, and other precision axes in industrial automation. The motor supports closed-loop motion tasks that require repeatable acceleration, stable speed control, and accurate positioning during frequent start-stop cycles. Its standardized mechanical interfaces simplify direct mounting to gearheads or machine frames while helping keep the overall drive package compact.

The motor employs a Comcoder feedback element that generates position data at 2048 lines/rev. This resolution, combined with the single-turn optical measuring principle, supplies the controller with accurate incremental and absolute references for every revolution. The feedback electronics comply with EPC 15T signaling, so the motor can connect to compatible Kollmorgen AKD drives without special adapters. A 40 mm frame size keeps the stator compact, and winding code C matches the electrical design to the magnetic circuit for medium-speed servo operation. The unit is supplied in a standard configuration, so the mechanical and electrical features follow the normal dimensions and pin assignments for this model.

Mechanical mounting is based on an IEC flange with accuracy N, allowing the motor to bolt directly to gearboxes or adapter plates without shimming. The output uses a smooth shaft, which supports clamp hubs or collet-style couplings where low backlash is important. The active magnetic section corresponds to rotor length index 2, which matches the thermal mass and torque behavior used for this frame size. The unit ships without a brake, so holding torque must come from the drive or from an external locking device when the axis is stopped. Gasketed connectors and alignment features are included to support installation in enclosed machinery where dependable cable routing and accurate motor positioning are required.