AKM11E-ANCNC-01 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKM11E-ANCNC-01 is part of the AKM Synchronous Servo Motors series and has a frame dimension of 40 mm with a smooth shaft and shaft seal. It uses a single turn inductive SFD feedback system with 4 lines and features two SpeedTec Ready connectors. The motor has a flange configuration complying with IEC standards and is supplied without a brake system.
Internal Product Review
The AKM11E-ANCNC-01 is a Kollmorgen AKM synchronous servo motor with an IEC flange configuration and a smooth shaft. SFD feedback with single-turn inductive sensing supports stable commutation and consistent positioning. A shaft seal and dual SpeedTec Ready connectors make the motor especially well suited for clean, efficient machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKM11E-ANCNC-01 is a compact servo motor produced by Kollmorgen for the AKM Synchronous Servo Motors series. It is intended for positioning axes, pick-and-place heads, light gantry drives, semiconductor tooling, and laboratory automation. The unit belongs to frame size 1 of the platform and provides precise torque control for low-inertia loads. Its permanent-magnet design supports responsive acceleration and accurate rotary motion when paired with a compatible servo drive.
This model operates without a brake, so static loads must be managed through drive torque or external clamps. Power and feedback are routed through two SpeedTec-ready connectors, which simplify cable attachment in confined installations. The mounting face uses an IEC flange with accuracy class N, allowing direct alignment with compatible metric gearboxes and machine plates. A rotor length index of 1 keeps the housing compact, while winding code E provides the electrical characteristics required for operation with compatible Kollmorgen AKD drives. The motor has a frame side measuring 40 mm, making it suitable for closely spaced multi-axis assemblies. Mechanical output is transferred through a smooth shaft, which avoids the stress concentrations associated with a keyway when clamping couplings or timing pulleys are used. This shaft arrangement also supports concentric coupling placement when the connected component is installed with the proper clamping force.
The motor is equipped with a shaft seal, which helps prevent lubricant mist and fine dust from reaching the front bearing area. Rotor position is measured by the Kollmorgen SFD feedback system, which transmits absolute position data to the drive over four lines. The feedback device uses a single-turn inductive format, providing position information within each mechanical revolution without multi-turn counting. Its physical envelope follows the Size 10/15/21 feedback format, allowing the associated connector arrangement to remain consistent with compatible equipment in the series. The inductive operating principle provides position feedback without relying on an optical disk, making the device suitable for motion systems exposed to normal industrial vibration. Feedback and power connections remain separated through the connector arrangement, supporting orderly cable routing around the compact motor housing.
