Product Description:

The AKD-T00606-NBAN-0000 is a digital servo drive produced by Kollmorgen within the AKD Servo Drives series. The unit sits between the incoming mains supply and a servo motor, converting line power into a controlled three-phase output that follows commands from an external motion controller. By modulating voltage and current in real time, it maintains accurate motor torque and velocity for pick-and-place robots, packaging axes, and other industrial automation tasks. This arrangement supports repeatable motion profiles and synchronized axis behavior in systems that require stable closed-loop performance.

The drive uses the BASIC control version, which supports standard velocity and torque regulation without optional advanced functions. It accepts a line input of 120 / 240 Vac 1~/3~, allowing installation on either single-phase test setups or three-phase production mains. During continuous S1 duty, the power stage delivers a nominal motor current of 6 Arms, while short-term dynamic events are covered by a peak capability of 18 Arms for up to five seconds. Its rated input power is 2.38 kVA, which helps size the supply circuit for the expected electrical load. This combination gives the drive enough current capacity for routine operation as well as brief acceleration and counter-torque demands.

The unit is supplied in the Standard USA customization, so default settings and labeling follow North American conventions. Command and feedback signals are handled through an analog interface, which supports legacy PLCs that use ±10 V setpoints instead of digital fieldbus communication. The hardware extension is None (rev 8+), so no auxiliary I/O cards are installed in this version. With a mass of 1.1 kg, the housing remains easy to place in a standard control cabinet where space and weight are limited. The compact form is useful in retrofit panels that need servo control without a large increase in enclosure load.