AKD-T00306-NBAN-D000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
0 Seconds
The Kollmorgen AKD-T00306-NBAN-D000 is part of the AKD Servo Drives series and offers a continuous output power of 1100 W. This BASIC version drive supports rated input power of 1.2 KVA and can operate on both 1 and 3 phase 120 or 240 Vac supply. It features an analog fieldbus connectivity, a peak output current of 9 Arms for 5 seconds, and weighs 1.1 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-T00306-NBAN-D000 is a BASIC-version AC servo drive manufactured by Kollmorgen in the AKD Servo Drives series. It converts incoming AC power into controlled motor currents so motion controllers can apply precise speed, torque, and position profiles to automated axes. Typical applications include indexing tables, Cartesian pick-and-place heads, and material-handling zones where fast response and integrated regeneration are useful. Because it is a servo drive rather than a stand-alone controller, it works with a separate motion system to regulate motor behavior in real time.
Continuous power output is rated at 1100 W, giving steady headroom for moderate-sized servomotors. At that load, the drive draws a nominal phase current of 3 Arms and can rise to 9 Arms for short acceleration intervals when extra torque is needed to overcome inertia. An internal overvoltage trip engages at 420 V on the DC link to protect the 940 µF capacitor bank. Current loops are refreshed at 1.5 MHz, which helps reduce position error during demanding motion profiles. The control electronics operate from a 24 V auxiliary supply, and command input is handled through an analog interface. The housing measures 156 mm deep and 168 mm high, supporting compact panel layouts, and the unit uses revision 8 hardware with the standard EU German configuration.
The power section accepts 120 / 240 Vac 1~/3~ mains and can run from either single-phase or three-phase feeds, with a continuous apparent power rating of 1.2 kVA. During braking, energy is routed to a built-in chopper that switches on at 380 V and sends it to a 33 Ohm resistor; this network handles 0.77 kW continuously and can absorb 5.4 kW for a peak interval of 5 s. The drive has a total mass of 1.1 kg, which keeps mounting loads low on DIN rails or plate-mounted panels. Support for either single-phase or three-phase input helps the unit fit a wider range of supply arrangements. Braking energy is dissipated internally during deceleration instead of being returned directly to the supply.
Frequently Asked Questions about AKD-T00306-NBAN-D000:
Q: What is the rated input power of the AKD-T00306-NBAN-D000 servo drive?
A: The AKD-T00306-NBAN-D000 servo drive supports a rated input power of 1.2 KVA for standard operation.
Q: What is the continuous output power of the AKD-T00306-NBAN-D000?
A: This model delivers a continuous output power of 1100 W for sustained motor operation.
Q: What supply voltages and phases are supported by the AKD-T00306-NBAN-D000?
A: The AKD-T00306-NBAN-D000 supports supply voltages of 120 or 240 Vac for both single and three-phase connections.
Q: What is the value of the external regeneration resistor required for the AKD-T00306-NBAN-D000?
A: The external regeneration resistor value specified for this drive is 33 Ohm.
Q: What type of fieldbus connectivity does the AKD-T00306-NBAN-D000 use?
A: Fieldbus connectivity for this model is provided via analog interface.
