AKD-P04807-NCEI-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The AKD-P04807-NCEI-0000 is industrial drive controller designed by Kollmorgen to accurately carry out the closed loop control of torque speed and position. The controller is a modular device with encoder emulation onboard and a support for ENDAT2.2, ENDAT2.2, BiSS or HIPERFACE protocols.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Kollmorgen is an international engineering company that is popularly known for its state-of-the-art industrial motion and motion control devices. The company is a trusted name in the delivery of advanced solutions for industries seeking precision and reliability in its operation processes. The AKD-P04807-NCEI-0000 is one of the sophisticated productions of Kollmorgen, it is an industrial drive controller that is intended to efficiently carry out the closed-loop control of the speed, position, torque, and general operation of industrial motors used in the industrial servo system. The controller is designed specifically for synchronous motor and it is particularly suited for the AKM motor series that is also designed by Kollmorgen. This industrial controller is intended to be built into industrial machines and are only to be used as integral parts of these plants or machines. Also, the controller must only be operated in a closed control cabinet suitable for the recommended ambient conditions. The AKD-P04807-NCEI-0000 industrial controller operates with an input current of 49.3 amperes, it also requires a rated input power of 40.9 kilovolts per ampere for its S1 operation. The rated supply input voltage for this industrial controller falls between 240 to about 480 volts, while the rated supply frequency should fall between 50 to about 400 hertz. The AKD-P04807-NCEI-0000 controller is a maintenance free device that can operate for a very long time without the need for maintenance operation, operators should avoid opening the housing of the controller as this will void the warranty covering the device. The inside of this industrial control unit can only be cleaned by the manufacturer, however operators are allowed to clean the device?s exterior after decommissioning as with isopropanol or any other similar cleaning solution.
Frequently Asked Questions about AKD-P04807-NCEI-0000:
Q: How does the external dynamic braking mode of the AKD-P04807-NCEI-0000 work?
A: The AKD-P04807-NCEI-0000 controller is has a built-in highly advanced dynamic braking mode which operates fully in hardware. When this is activated, the controller shorts the motor terminals in phase with back EMF.
Q: How does the AKD-P04807-NCEI-0000 drive handle regenerated energy?
A: When the amount of returned energy in the bus capacitor build-up enough, the drive activates the regenerated energy circuit to start dumping the returned energy inton the brake resistor.
Q: Does the AKD-P04807-NCEI-0000 controller feature an internal brake resistor?
A: The AKD-P04807-NCEI-0000 dynamic brake does not feature an internal brake resistor. However, an external dynamic resistor can be connected to the controller depending on the application requirements.
Q: What does the Safety Torque Function (STO) do?
A: The safety torque function helps the controller to prevent the unintentional resart of the motor connected to it even when power is being supplied to the drive.
Q: What is the emergency Off function used for?
A: The emergency off function is used to switch off the electrical power supply of the machine. This is done to prevent users from any risk from electrical energy.
