Product Description:

The AKD-P04807-NBPN-0000 servo drive is manufactured by Kollmorgen and is catalogued in the AKD Servo Drive product family, forming part of the AKD Servo Drives series. Designed for industrial automation, the unit converts three-phase AC input into regulated output for torque, speed, and position control of brushless servo motors. By integrating tight loop regulation with real-time network communication, the device acts as the motion amplifier in systems such as packaging lines, pick-and-place stations, and material handling axes.

The unit is supplied in the Standard USA customization variant, so labeling, firmware defaults, and safety settings are aligned with North American electrical codes. Its drive firmware is the Position Indexer version, which allows internal sequencing of motion profiles without an external PLC. For plant networking, the integrated PROFINET RT interface exchanges cyclic setpoints and diagnostics with Siemens-based controllers at Ethernet speeds. Continuous current capability is 48 Arms, enabling the drive to feed mid-frame motors at their thermal limit, while short-term events such as acceleration or impact loads can draw up to 96 Arms for five seconds without triggering over-current protection.

The rated input side is sized for 40.9 KVA of apparent power, meaning transformers and circuit protection must accommodate that load under S1 duty. It accepts a three-phase supply of 240 / 480 Vac 3~, so the same model can serve low- or high-voltage sections by setting the bus link jumpers. Cabinet layout is simplified because the chassis weighs 11.5 kg, allowing single-person installation on DIN rail or panel studs. There is None (rev 8+) hardware extension; all auxiliary I/O, braking transistors, and feedback ports are already on the base board, keeping the product profile consistent across mechanical revisions.