AKD-P04807-NBCN-E091 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-P04807-NBCN-E091 is part of the AKD Servo Drives series and features a Position Indexer drive version. It supports CANopen fieldbus connectivity and has a nominal current of 48 Arms, with a peak output current of 96 Arms for up to 5 seconds. The drive operates at a rated input power of 40.9 KVA with a supply voltage of 240 or 480 Vac 3-phase, and it weighs 11.5 kg.
Internal Product Review
The AKD-P04807-NBCN-E091 is a Kollmorgen AKD servo drive configured as a Position Indexer with CANopen fieldbus connectivity. Strong power handling comes from a 48 Arms nominal current and 96 Arms peak output current, making this unit a very capable choice for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P04807-NBCN-E091 is a servo drive manufactured by Kollmorgen and supplied within the AKD Servo Drives series. Designed as a panel-mount motion amplifier, the unit converts three-phase mains power into controlled current for synchronous or induction motors used in positioning stages, material-handling axes, and general automation cells. Closed-loop velocity and position regulation let the drive respond to command changes while correcting for load variation through motor feedback. This makes it suitable for cabinet-based motion systems where precise motor control is required across repeated cycles.
It uses the Position Indexer option, allowing standalone execution of indexed moves through digital I/O or network messages when a machine sequence does not require a separate motion controller for every step. Communication is handled through CANopen, so parameter data and motion commands can travel on a single twisted-pair bus. The power stage accepts a 240 / 480 Vac 3~ input, rectifies it, and feeds the DC link that supplies the motor phases. Under continuous duty, the amplifier delivers 48 Arms of output current, while short acceleration or disturbance loads can draw 96 Arms for up to five seconds.
In revision 8 or higher, the drive is supplied without add-on boards, which leaves the base configuration free of extra expansion hardware and simplifies internal layout. At maximum continuous operation, it absorbs 40.9 kVA of apparent power from the mains, so the upstream supply must support that demand during sustained running conditions. Despite that electrical capacity, the chassis has a mass of 11.5 kg, which keeps installation handling manageable for a cabinet-mounted unit. The combination of high current output and a moderate enclosure mass suits installations where power density matters.
