AKD-P02407-NCAN-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-P02407-NCAN-0000 is part of the AKD Servo Drives series and weighs 5.3 kilograms. This position indexer version supports analog fieldbus connectivity, a rated supply voltage of 240 or 480 Vac three phase, and has a nominal current of 24 Arms with a peak output of 48 Arms for 5 seconds. Its rated input power is 15.2 KVA and the unit is a standard USA variant.
Internal Product Review
The AKD-P02407-NCAN-0000 is a Kollmorgen AKD servo drive with a Position Indexer version and analog fieldbus connectivity. Rated for 24 Arms nominal current and 48 Arms peak output current for 5 s, the drive offers strong dynamic response during acceleration and load changes. Support for 240 / 480 Vac 3~ input makes the unit a capable choice for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P02407-NCAN-0000 is a servo drive manufactured by Kollmorgen within the AKD Servo Drives series. As a panel-mounted power stage, it converts three-phase mains power into controlled voltage and current for synchronous or induction motors. This allows closed-loop motion axes to track commanded profiles in automated machinery and material-handling cells, while maintaining accurate speed and position control during changing load conditions. In machine operation, the drive regulates motor output so acceleration, running speed, and stopping behavior remain consistent from cycle to cycle.
This unit accepts a three-phase input of 240 / 480 Vac 3~, so one drive can be used with two common industrial supply classes. Under continuous duty, it delivers a nominal phase current of 24 Arms, giving medium-frame motors sufficient torque without external boosters. For short demands such as acceleration ramps, it can supply up to 48 Arms for five seconds, which helps the axis overcome load inertia during brief peaks. Its apparent input power is rated at 15.2 kVA, so enclosure ventilation should be sized for the associated heat load. The drive uses the Position Indexer control option, allowing absolute and incremental move sequences to be executed directly from digital I/O without a separate motion controller. This built-in motion capability suits applications that need simple indexing and repeatable point-to-point movement.
Axis control relies on Analog command connectivity, which suits retrofits where legacy ±10 V command loops are already installed. The hardware is supplied in the Standard USA configuration, so connector types, labeling, and EMC filtering align with North American installation practices. With a 50 mm housing width, the drive weighs 5.3 kg, which helps keep panel layouts compact and reduces load on the mounting surface. Its slim enclosure also leaves more clearance for neighboring components in dense multi-axis cabinets. That compact format can also reduce crowding around cable entry areas and power distribution hardware.
