AKD-P02407-NBCC-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-P02407-NBCC-0000 is a servo drive from the AKD Servo Drives series with a nominal current of 24 Arms and a peak output current of 48 Arms. It supports EtherCAT and CANopen fieldbus connectivity and has a rated input power of 15.2 KVA. This drive has a rated supply voltage of 240 or 480 Vac three-phase and weighs 5.3 kg.
Internal Product Review
The AKD-P02407-NBCC-0000 is a Kollmorgen AKD servo drive configured as a Position Indexer. EtherCAT and CANopen connectivity with 240/480 Vac three-phase input supports efficient integration in coordinated motion systems. A 24 Arms nominal current and 48 Arms peak output current give this unit strong dynamic capability for demanding axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P02407-NBCC-0000 is a servo drive manufactured by Kollmorgen and listed under the AKD Servo Drives series. It conditions three-phase power so motion controllers can deliver precise torque, velocity, and position commands to brushless servomotors in automated assembly cells, packaging lines, and material-handling equipment. By modulating the supply voltage and current in real time, the drive maintains motor performance while guarding against overcurrent, overvoltage, and regenerative transients. This allows the connected motor to respond accurately during both steady operation and rapid motion changes.
Its continuous output capacity is 24 Arms, which is the root-mean-square phase current the unit can supply indefinitely without thermal derating. For short acceleration bursts, the power stage delivers 48 Arms for up to five seconds, allowing machinery to overcome static friction or large inertial loads without oversizing the drive. The input side is rated at 15.2 kVA under S1 duty, reflecting the maximum apparent power drawn at full load. Compatibility with 240/480 Vac three-phase mains allows the same model to be used in low- or high-voltage panels worldwide. Command and diagnostic traffic move over EtherCAT and CANopen, allowing either deterministic networked motion or simpler CAN-based coordination with a PLC.
The drive uses the Position Indexer operating mode, so it can store point tables, execute homing, and generate trajectories without constant host intervention. On rev 8+ units, no optional extension boards are required because the core electronics already provide the needed functions. Delivered in the Standard USA customization variant, it uses fuse recommendations and EMC layout suited to North American cabinet practices. A mass of 5.3 kg keeps the chassis compact for dense enclosures while still providing enough surface area for natural convection and panel-mount cooling.
