Product Description:

The AKD-P02407-NBAN-0000 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. It provides closed-loop current, velocity, and position regulation between a motion controller and a synchronous servo motor, allowing industrial axes to follow commanded trajectories with repeatable accuracy. The unit integrates power conversion, control electronics, and protective functions inside a single chassis for cabinet installation.

This drive is delivered in the Standard USA customization variant, so its defaults match North American electrical codes. The drive includes the Position Indexer function, permitting up to thirty resident move profiles that can be triggered by discrete inputs without an external PLC. Command and feedback exchange use an analog interface, so ±10 V or 4–20 mA references can set torque, velocity, or position while maintaining compatibility with legacy control cards. Expansion slots remain unused because there is no hardware extension, which keeps the overall width identical to baseline models. For continuous operation, the inverter delivers a phase current of 24 Arms, giving it the capability to run medium-inertia motors on conveyors, pick-and-place gantries, or small presses without overheating.

Dynamic events are handled by a five-second output reserve of 48 Arms, letting the motor accelerate heavy loads or absorb brief regenerative currents without dropping the DC bus. On the supply side, the drive draws up to 15.2 kVA at rated load, so branch protection devices must be sized for that apparent power. The power module accepts a 240/480 Vac 3-phase supply, enabling operation from either standard industrial voltage class without a transformer. Despite the dual-voltage design and integral heat sink, the assembly weighs only 5.3 kg, which helps simplify installation on panel plates.