Product Description:

The AKD-P02407-NAEC-0100 servo drive is manufactured by Kollmorgen as part of the AKD Servo Drives series. Delivered in the Position Indexer version, it closes internal current, velocity, and position loops so that a host PLC only needs to transmit motion targets. Its EtherCAT fieldbus interface supports synchronized network cycles, allowing integration into decentralized automation where precise axis coordination is required. By accepting three-phase AC power and providing Safe Torque Off, the drive helps maintain machine productivity and operator protection.

The drive draws power from a three-phase supply at 240 / 480 Vac 3~ and can continuously deliver 24 Arms, rising to 48 Arms for up to five seconds during accelerations. A PWM carrier of 8 kHz reduces motor acoustic noise while keeping switching losses within the specified full-load dissipation of 137 W. Under rated conditions, the input apparent power reaches 15.2 kVA, and current regulation is refreshed every 62.5 µs, with the position loop updated after only 275 µs. These high-speed cycles let the drive execute fine indexing routines required in pick-and-place or labeling stations. The supply must stay within 85% relative humidity without condensation, and the drive uses the None (rev 7) configuration, meaning no optional extensions are fitted.

Mechanically, the unit has a footprint of only 105 mm wide, 228 mm deep, and 306 mm high, easing cabinet layout. It weighs 5.3 kg, so standard DIN rail or panel hardware can support it without extra bracing. Conformance with the safety architecture reaches SIL2, PL d when the STO inputs are wired according to functional-safety rules. The aluminum chassis can dissipate heat through natural convection; cabinet airflow is required only when ambient limits are exceeded. The fanless design supports quiet operation in enclosed cabinets.