Product Description:

The AKD-P02406-NCEC-0000 is a servo drive manufactured by Kollmorgen within the AKD Servo Drives series. Acting as a closed-loop motor controller, it converts facility AC power into regulated phase currents that command brushless servomotors. This regulation lets automated machinery hold position, follow velocity profiles, and execute synchronized moves required in packaging equipment, electronic assembly cells, and other motion-focused production lines. It is suited for axes that need repeatable starts, stops, and speed changes while remaining under continuous feedback control.

Configured as a Position Indexer, the drive stores motion sequences internally so a PLC can launch predefined moves with a single trigger. The unit is built in the Standard USA version, which uses default settings and labeling intended for North American control cabinets. Networked coordination is provided through EtherCAT, allowing fast exchange of command and feedback data between the drive and the higher-level controller. Under continuous duty, the power stage delivers 24 Arms, and it can supply up to 48 Arms for five-second intervals when the axis must overcome inertia or static friction. This operating range supports point-to-point motion, indexing tasks, and short bursts of higher demand without interrupting normal closed-loop control.

Its power circuitry is rated for 7.6 kVA, which supports demanding motion cycles while keeping the internal bus section within its intended operating range. The input stage accepts 120 / 240 Vac 1~/3~, allowing the drive to operate from either single-phase or three-phase sources depending on the available supply arrangement. With a mass of 3.7 kg, the chassis remains compact enough for dense cabinet layouts, and it can be DIN rail or panel mounted to suit different enclosure designs. These mounting options help when multiple servo axes must be placed in limited space while still leaving room for orderly cable routing and service access.