Product Description:

The AKD-P01207-NCEI-0000 is a servo drive manufactured by Kollmorgen for the AKD Servo Drives series. As a closed-loop power stage, it receives three-phase mains, modulates output waveforms, and drives a matched motor in precise current, velocity, or position modes. Typical automation roles include coordinated axes on pick-and-place gantries, form-fill-seal stations, and indexing conveyors where consistent servo accuracy is required. This type of control helps the connected motor respond cleanly to changing loads while maintaining repeatable motion during cyclic operation in automated packaging and material-handling equipment.

This model accepts a line input of 240 / 480 Vac three-phase, allowing the same unit to be wired to either lower- or higher-voltage facilities without tap changes. Under continuous duty, it delivers a nominal phase current of 12 Arms, which suits steady-state motor operation. For short accelerations, it can source up to 30 Arms for five seconds, supplying additional torque during start-up or rapid directional reversals. The internal power section is rated at 7.65 kVA, so upstream power distribution must support that apparent power level. The drive uses the Position Indexer version, so point-to-point moves, registration marks, and homing routines can be executed locally without an external motion card.

High-level commands and diagnostics travel over Ethernet/IP, allowing the drive to integrate with CIP-based controller platforms over a single twisted-pair trunk. The drive comes in the Standard USA version, so factory settings follow North American safety labeling and default parameter units. At only 5.3 kg, the chassis can be DIN rail or panel mounted beside other power electronics without exceeding common cabinet load limits. That mounting flexibility is useful when cabinet space is limited or when multiple servo axes must be arranged in a compact enclosure.