Product Description:

The AKD-P01207-NCCC-0000 servo drive is manufactured by Kollmorgen and belongs to the AKD Servo Drives series. Acting as an AC power interface between a three-phase supply and a servo motor, it conditions voltage and current so that commanded velocity and position values are reproduced accurately on the mechanical axis. The device is used in industrial automation cells where precise motion coordination is required for packaging lines, pick-and-place modules, and assembly stations. Its function is to translate electrical control commands into controlled motor output during speed changes, positioning moves, and synchronized axis motion.

The drive is supplied in the Position Indexer version, so it can store target positions internally and initiate moves without an external motion controller. Communication to higher-level PLCs is available through EtherCAT & CANopen, enabling deterministic command exchange and diagnostic readback. These real-time networks allow short cycle times for coordinated multi-axis interpolation, and their standardized object dictionaries keep parameter access consistent across vendors. Under steady-state operation, the current loop is rated for 12 Arms, while transient loads can be supported with up to 30 Arms for five seconds. This current range reflects the thermal capacity of the power stage and the energy available for acceleration spikes. When delivering nominal torque to the motor, the device draws a continuous apparent power of 7.65 kVA from the mains input.

This variant follows the Standard USA customization rules, which set labeling, connectors, and default parameter sets for North American installations. It accepts three-phase mains at 240 / 480 Vac 3~ without needing jumper changes, allowing the same hardware to be deployed on low-voltage or high-voltage plant distribution networks. Despite its compact size, the unit uses a 50 mm wide frame and weighs only 5.3 kg, permitting high-density cabinet layouts while maintaining thermal margins and conductor clearances for AKD drives. This compact housing helps conserve panel space in multi-axis installations.