Product Description:

The AKD-P01207-NBPN-0123 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. It serves as the link between a three-phase mains source and a synchronous servo motor, supplying regulated current while closing the speed and position loops inside the drive itself. Because those control loops run in the drive, the motor can respond quickly to load changes without depending on constant high-speed correction from the main PLC. A narrow chassis and an integrated heat sink allow installation in densely populated control panels without forcing changes to normal cabinet airflow.

The drive version is identified as Position Indexer, meaning motion sequences are stored and triggered directly from the unit. This arrangement supports repeated move profiles without requiring every step to be generated externally during operation. Command data and diagnostics are exchanged over PROFINET RT, providing deterministic Ethernet traffic to higher-level controllers. The power stage sustains a continuous phase current of 12 Arms, while short acceleration or deceleration events can draw up to 30 Arms for five seconds before thermal limits are enforced. The device absorbs 7.65 kVA at rated load, which helps size feeder and transformer capacity.

Input terminals accommodate a universal line of 240 / 480 Vac three-phase, allowing the same hardware to run on low- or high-voltage plants without tap changes. The enclosure weighs 5.3 kg, which keeps handling manageable for DIN rail or backplate installation and limits added load inside compact control cabinets. No ancillary option board is installed, and the hardware status is None (rev 8+). That configuration keeps the unit in its base form while retaining the standard features included with this revision.