AKD-P01207-NBPN-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen AKD-P01207-NBPN-0000 is part of the AKD Servo Drives series and is a standard USA position indexer drive. It supports PROFINET RT fieldbus connectivity and delivers a nominal current of 12 Arms with a peak output current of 30 Arms for 5 seconds. The drive operates at a rated supply voltage of 240 or 480 Vac three-phase and weighs 5.3 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P01207-NBPN-0000 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. As a closed-loop power stage, it supplies regulated current and voltage to matched servo motors so motion axes in automated machinery can accelerate, decelerate, and hold position with programmed precision. Its control loop lets the drive respond quickly to command changes and load disturbances during normal machine operation. This helps maintain stable axis behavior in indexing, transfer, and positioning tasks. By integrating the drive into a machine, builders can use a single motion platform for synchronized multi-axis equipment, packaging systems, or robotics.
The drive is delivered in the Standard USA version, so it follows North American electrical conventions. It uses the Position Indexer control version, allowing stand-alone execution of indexed moves without an external PLC. For networked operation, a PROFINET RT interface is included for deterministic Ethernet communication suited to coordinated motion. The drive has a nominal output of 12 Arms, which is the RMS phase current it can supply continuously while staying within temperature limits. Short bursts up to 30 Arms for five seconds are available so the connected motor can overcome inertial loads during startup or rapid trajectory changes without clipping torque. This arrangement supports applications that need both local motion sequences and network supervision from a central controller.
No optional I/O or feedback boards are fitted because the extension is None (rev 8+), leaving only the base feature set installed. With only the base feature set installed, the internal configuration remains straightforward for systems that do not require expansion cards. The input side draws up to 7.65 KVA of apparent power under rated conditions, which should be considered when sizing mains protection and transformer capacity. It accepts a three-phase supply of 240 / 480 Vac 3~, allowing the same model to operate in either lower-voltage or higher-voltage plants without changing the basic drive selection. The standard-width housing weighs 5.3 kg, which keeps handling manageable during panel or DIN-rail mounting and helps limit loading on cabinet support structures.
Frequently Asked Questions about AKD-P01207-NBPN-0000:
Q: What fieldbus protocol does the AKD-P01207-NBPN-0000 drive use?
A: The AKD-P01207-NBPN-0000 supports PROFINET RT for its fieldbus connectivity.
Q: What is the nominal current rating of the AKD-P01207-NBPN-0000?
A: This drive provides a nominal current output of 12 Arms, suitable for demanding motion control applications.
Q: What is the peak output current for short bursts on the AKD-P01207-NBPN-0000 drive?
A: The unit can deliver a peak output current of 30 Arms for up to 5 seconds.
Q: What drive version is the AKD-P01207-NBPN-0000?
A: The AKD-P01207-NBPN-0000 is a Position Indexer version, supporting advanced positioning functionalities.
Q: What supply voltage does the AKD-P01207-NBPN-0000 require?
A: This model operates on a rated supply voltage of 240 or 480 Vac (three-phase).
