Product Description:

The AKD-P01207-NACN-0095 is a digital servo drive manufactured by Kollmorgen and delivered as part of the AKD Servo Drives series for motion control tasks in industrial automation. The unit serves as the power and control interface between a programmable controller and a brushless servo motor, providing regulated AC output that follows commanded velocity or position profiles. By converting three-phase mains power into modulated voltage and current, the drive enables accurate axis positioning and energy-efficient machine operation.

In this configuration the drive is shipped with the Position Indexer firmware option, so the controller generates internal position profiles without an external motion card. Communication with higher-level PLCs is achieved over CANopen, allowing cyclic set-point exchange and status feedback on the fieldbus. During continuous duty the power stage supplies up to 12 Arms of motor current; this value defines the thermal design point for cabling and motor selection. For acceleration bursts lasting five seconds the current ceiling rises to 30 Arms, giving additional torque headroom for rapid starts or load changes before the protection logic intervenes. The input stage accepts a three-phase mains source of 240 / 480 Vac 3~, so a single part number can be used on low- or high-voltage plant power systems without hardware changes.

The drive’s power handling capability is reflected in a continuous input rating of 7.65 KVA, which indicates the maximum apparent power the cabinet feeder must supply under steady load. Because the hardware extension is listed as None (rev 7), every control and I/O function is already contained on the base board, simplifying spare-part logistics and firmware maintenance. At 5.3 kg the standard-width housing adds minimal mass to a multi-axis panel, yet its aluminum casting still provides good heat conduction. The Kollmorgen design approach balances compact size with clear wiring access, so installers can meet enclosure spacing and thermal derating guidelines without additional adapters.