Product Description:

The AKD-P01207-NACC-D065 is a servo drive manufactured by Kollmorgen for the AKD Servo Drives series. It sits between a motion controller and a brushless servomotor, generating regulated phase currents that convert digital position commands into mechanical motion. By combining current, velocity, and position control loops in one housing, the unit supports repeatable axis behavior in packaging systems, pick-and-place gantries, and other automated assemblies. Because the control loops are closed inside the drive, command response remains stable even when the load changes quickly during repeated motion cycles. This arrangement also reduces the amount of external control hardware needed around a single axis.

This model is delivered in the Position Indexer drive version, so internal motion registers can execute standalone point-to-point moves without requiring a supervisory PLC for every step. That onboard indexing capability can offload simple move sequences from the higher-level controller. Machine networks connect through EtherCAT and CANopen, allowing either synchronous real-time control or classic distributed communication. The continuous output capability is rated at 12 Arms, which is the steady-state current the power stage can supply to the motor windings. For short bursts of acceleration, the current may rise to 30 Arms for up to five seconds, providing extra torque during startup or rapid indexing. Rated apparent power is 7.65 kVA, which helps set feeder and protective device requirements.

The supply section accepts three-phase mains at 240 / 480 Vac 3~, so the same unit can operate in low- or high-voltage plants without tap changes. This flexibility is useful when similar machine platforms are installed in facilities with different mains standards. The drive uses rev 7 hardware and has no optional I/O or safety boards fitted, which keeps the package straightforward for panel integration. Its standard-width housing weighs 5.3 kg, a useful value when panel backplanes, mounting rails, and enclosure supports are sized for combined equipment loads. The compact form also helps place the drive alongside neighboring control components without taking excessive cabinet space.