AKD-P01206-NCEI-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-P01206-NCEI-0000 is a servo drive in the AKD Servo Drives series with a nominal current of 12 Arms and a peak output current of 30 Arms for 5 seconds. It features Ethernet/IP fieldbus connectivity and supports a rated supply voltage of 120 or 240 Vac in single or three phase input. The unit has a rated input power of 3.82 KVA and weighs 2 kilograms.
Internal Product Review
The AKD-P01206-NCEI-0000 is a Kollmorgen AKD servo drive configured as a Position Indexer with Ethernet/IP connectivity. Rated for 12 Arms nominal current and 30 Arms peak output current over 5 seconds, the drive offers strong dynamic performance for responsive motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P01206-NCEI-0000 is a single-axis servo drive produced by Kollmorgen within the AKD Servo Drives series. As an amplifier and controller, it links low-level machine commands to the electromagnetic requirements of a servomotor, allowing coordinated motion, quick settling times, and consistent positioning for automated machinery. Within distributed control architectures, it is mounted in control cabinets and communicates with host PLCs over industrial networks.
Internally, the drive is configured as a Position Indexer, meaning it can execute stored motion profiles without a separate motion card. Command and diagnostic data move through the integrated Ethernet/IP interface, enabling high-speed updates for multi-axis installations. Continuous motor demand is supported by a nominal output of 12 Arms, while short bursts of up to five seconds are delivered at 30 Arms to overcome inertia during acceleration. Power drawn from the mains is limited to a rated apparent power of 3.82 kVA, aligning the unit with medium-power axes in packaging, printing, or material-handling equipment. The drive accepts either single-phase or three-phase supply lines, so panel wiring can match local service availability.
For cabinet integration, the drive is specified for 120 / 240 Vac single-phase or three-phase input, eliminating external autotransformers when machinery is shipped to regions with differing utility grids. The hardware corresponds to the Standard USA customization variant, indicating labeling, connectors, and emissions compliance suitable for North American installations. With a mass of only 2 kg, the enclosure fits dense multi-drive racks without exceeding typical DIN-rail load limits. Documentation and software treat the model as part of the AKD Servo Drive product family, so parameter files, tuning procedures, and accessory kits remain consistent across current AKD sizes.
