AKD-P01206-NCAN-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The AKD-P01206-NCAN-0000 is a servo drive manufactured by Kollmorgen as part of the AKD Servo Drives series. This Position Indexer version supports analog fieldbus connectivity and has a nominal current rating of 12 Arms. It features a rated supply voltage of 120 or 240 Vac and weighs 2 kilograms.
Internal Product Review
The AKD-P01206-NCAN-0000 is a Kollmorgen AKD servo drive with Position Indexer functionality and analog connectivity. A 12 Arms nominal current and 30 Arms peak output current for 5 seconds give this unit strong motion-control headroom for demanding axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P01206-NCAN-0000 servo drive is manufactured by Kollmorgen as a member of the AKD Servo Drives series. It converts line power into regulated three-phase output for a matched motor and executes motion commands received from a controller. In industrial automation lines, the unit closes the power loop and maintains programmed speed or position profiles so packaging, material-handling, or machining stations run with repeatable accuracy. This operating role suits coordinated motion tasks that require steady response during frequent start and stop cycles.
Internally, the drive is configured as a Position Indexer, so it stores position tables and steps through them without an external PLC controlling each move in real time. A mains input of 120 / 240 Vac 1~/3~ allows the same hardware to operate on single-phase or three-phase supplies, simplifying panel design. At rated conditions, the converter draws 3.82 kVA and delivers a continuous motor phase current of 12 Arms. For brief acceleration events, it can supply 30 Arms for five seconds, giving extra torque during rapid starts or load disturbances. These electrical limits set the range for compatible motor winding impedances and help determine cable sizing so voltage drop and thermal overload are avoided.
Analog command interfaces remain available through the drive’s Analog configuration, letting legacy ±10 V velocity loops or 4–20 mA process signals coexist with digital AKD units on the same machine. The Standard USA customization variant supports North American labeling and fuse practices. With a mass of only 2 kg, the chassis can be DIN-rail mounted inside small enclosures or attached where available space is limited. Its compact housing is useful in cabinets that need short cable runs and straightforward placement near the driven axis.
