AKD-P00607-NCEC-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen AKD-P00607-NCEC-0000 is a servo drive from the AKD Servo Drives series, offering a nominal current of 6 Arms and a peak output current of 18 Arms for 5 seconds. This position indexer version supports EtherCAT fieldbus connectivity and operates at a supply voltage of 240 or 480 Vac 3-phase. The drive is rated for 4.49 KVA input power and has a standard weight of 2.7 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00607-NCEC-0000 is a compact three-phase servo drive produced by Kollmorgen for the AKD Servo Drives series. Acting as an intelligent power stage, it interfaces directly with machine controllers to energize brushless servomotors and coordinate tightly timed motion sequences. By rectifying and synthesizing the required line-to-motor waveforms, the device supports high-speed positioning and velocity regulation that are essential in robotics, automated assembly cells, and material-handling equipment across discrete manufacturing environments. Its standard width allows dense cabinet layouts while maintaining safe thermal clearances.
It communicates with the real-time fieldbus protocol EtherCAT, so command packets and feedback travel through a deterministic network that supports microsecond-level synchronization among axes. Under continuous duty, the power stage delivers a nominal phase current of 6 Arms, establishing the steady-state torque capability for the connected motor. For rapid acceleration or disturbance rejection, it can supply up to 18 Arms for five seconds, providing short-term current headroom during dynamic motion. The input section accepts three-phase mains at 240 / 480 Vac 3~, enabling the same model to serve low- and high-voltage plants without hardware changes. At that line level, the drive draws a rated apparent power of 4.49 KVA, a figure used for branch protection and fuse sizing. Its enclosure weighs only 2.7 kg, permitting direct panel mounting without additional structural support.
The configuration Standard USA adjusts factory parameters, connector labeling, and safety markings to match North American installation codes. The drive uses the Position Indexer operating mode, allowing standalone execution of point-to-point motion sequences so a PLC may issue target numbers instead of streaming trajectories. It is part of the AKD Servo Drive platform, so it uses the same diagnostic interface and general control environment as higher-power models. This supports consistent setup across machines that use different drive sizes within the same system.
Frequently Asked Questions about AKD-P00607-NCEC-0000:
Q: What fieldbus protocol does the AKD-P00607-NCEC-0000 servo drive support?
A: The AKD-P00607-NCEC-0000 is equipped with EtherCAT fieldbus connectivity, supporting real-time automation communication.
Q: What is the nominal current rating of the AKD-P00607-NCEC-0000 servo drive?
A: This model is rated for a nominal current of 6 Arms, appropriate for moderate power applications.
Q: What is the peak output current for the AKD-P00607-NCEC-0000 model?
A: The AKD-P00607-NCEC-0000 can deliver a peak output current of 18 Arms for short duration loads.
Q: What supply voltage does the AKD-P00607-NCEC-0000 require?
A: This servo drive operates with a rated supply voltage of 240 or 480 Vac three-phase input.
Q: What drive version does the AKD-P00607-NCEC-0000 feature?
A: The drive version of this unit is Position Indexer, suitable for applications requiring precise positioning control.
