Product Description:

The AKD-P00607-NCCC-1000 servo drive is a three-phase motion controller from Kollmorgen and belongs to the AKD Servo Drives series. Designed for cabinet installation, the unit supplies precise current and position control to synchronous servo motors in automated cells, actuation modules, and indexing stations. This type of drive is used where servo axes must start, stop, and hold position with repeatable motion during automated production. It translates digital motion commands into regulated motor torque, allowing coordinated axis movement without external mechanical gearing.

Inside the drive, Position Indexer firmware adds onboard motion sequences so that a host controller only needs to issue start or stop commands instead of managing every move step by step. Real-time communication is provided through EtherCAT & CANopen, allowing synchronized updates of velocity, position, and status bits in distributed control systems. The converter supplies a continuous phase current of 6 Arms, supporting thermal steady-state operation for midsize rotary motors during normal running conditions. During acceleration or abrupt load changes, it can deliver 18 Arms for up to five seconds to provide extra torque when short-term demand rises above the continuous level. Mains connectivity accepts 240 / 480 Vac 3~, so the same unit can be used on both low- and high-voltage plant power networks.

The rated input power is 4.49 kVA, which is used to size branch circuit protection and transformers for the connected supply. At only 2.7 kg, the unit can be mounted on DIN rail or back-panel surfaces without additional bracing, which helps keep control enclosures compact. Its low mass also supports installation in panels where available mounting space is limited and component density is high. The control algorithms match current loops to motor inductance, helping the drive maintain smooth motion across the speed range.