Product Description:

The AKD-P00607-NBPN-I000 servo drive is built by Kollmorgen and supplied in the AKD Servo Drives series. It serves as a position indexer for coordinated point-to-point moves in industrial axes, and PROFINET RT networking links the unit to higher-level PLCs. This control mode supports indexed motion sequences without requiring a separate external positioning module. A CE line filter is fitted on the supply input to support EMC compliance. The drive is supplied in the standard EU Italian variant and incorporates an internal power supply, so no auxiliary 24 V source is required. By conditioning incoming power into regulated motor current, it positions loads precisely in packaging, material-handling, or assembly stations.

Its electrical ratings support continuous motor control at a nominal current of 6 Arms, while short-term overloads up to 18 Arms for five seconds cover acceleration peaks. The supply accepts three-phase input at 240 / 480 Vac 3~ and draws a rated apparent power of 4.49 kVA during S1 duty. Under full load, the drive releases only 102 W of heat, so cabinet ventilation demands remain moderate. This output profile supports steady motion control with brief overload capacity during faster indexing moves.

The mechanical form factor uses a width of 70 mm, a depth of 185 mm, and a height of 256 mm, yet the assembly weighs only 2.7 kg. Control loops refresh quickly: the velocity loop updates every 62.5 µs and the position loop completes in 271 µs, coordinated through a PWM stage that switches at 8 kHz. These loop times support responsive speed and position control during short-cycle motion. Operation is permitted in environments up to 85% relative humidity when condensation is avoided. The compact enclosure and front-mounted Ethernet connections help the drive fit neatly beside other control hardware.