AKD-P00607-NBPN-D000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The AKD-P00607-NBPN-D000 servo drive is manufactured by Kollmorgen as part of the AKD Servo Drives series. It supports PROFINET RT fieldbus connectivity and is a Position Indexer drive version. The drive provides a nominal current of 6 Arms and a peak output current of 18 Arms for 5 seconds, with a rated input power of 4.49 KVA and rated supply voltage of 240 to 480 Vac three phase. The unit weighs 2.7 kilograms.
Internal Product Review
The AKD-P00607-NBPN-D000 is a Kollmorgen AKD servo drive with Position Indexer functionality. PROFINET RT connectivity and a 240 / 480 Vac three-phase supply make integration into modern motion systems straightforward. A 6 Arms nominal current with 18 Arms peak output for 5 seconds gives this unit strong dynamic response and makes it a very capable servo drive.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00607-NBPN-D000 is a servo amplifier produced by Kollmorgen as part of the AKD Servo Drives series. In machine tools, packaging lines, and material-handling axes, the unit supplies regulated three-phase power to synchronous or induction motors while monitoring velocity, position, and torque loops in real time. By combining motion control with integrated safety and diagnostic functions, the drive simplifies cabinet wiring and supports close coordination between mechanical loads and PLC commands. Its compact design is suitable for control cabinets that contain several coordinated motion axes.
The electrical section accepts a 240/480 VAC three-phase supply, allowing the drive to operate in low- or medium-voltage plants without transformer tap changes. Continuous motor excitation is supported by a nominal phase current of 6 A RMS. Transient events, such as rapid acceleration, are covered by a five-second peak current of 18 A RMS. Line consumption under rated conditions reaches 4.49 kVA, which supports feeder sizing and thermal calculations for control panels. Real-time communication with higher-level controllers occurs through PROFINET RT, enabling deterministic exchange of position data and diagnostic information over standard Ethernet cabling. The communication interface supports integration with compatible PLC-based automation systems without requiring a separate network gateway.
The Position Indexer operating mode executes stand-alone move sequences from onboard memory when higher-level motion commands are unnecessary. Regional settings use the Standard EU German customization, which affects the default language, parameter units, and applicable regulatory markings. The drive has no add-on I/O or encoder breakout boards, keeping the enclosure width at 50 mm for installation in densely packed control cabinets. Its mass of 2.7 kg reduces the load placed on mounting rails and cabinet panels. The standard-width housing also allows adjacent equipment to be arranged with predictable spacing and airflow clearance. Onboard diagnostics provide operating status and fault information that can be transmitted to the connected controller through the real-time network.
