Product Description:

The AKD-P00607-NBPN-0000 is a servo drive manufactured by Kollmorgen and belongs to the AKD Servo Drives series. As an AC drive, it supplies closed-loop torque, velocity, and position control to matched servo motors. It can be used where a host machine controller sends motion commands while the drive closes the motor loop locally. This allows the unit to support packaging lines, pick-and-place axes, indexing stations, and other automated equipment that depend on accurate motor response during repeated motion cycles.

The unit is delivered in the Standard USA customization variant, so terminal markings, fuse ratings, and safety labeling align with North American electrical codes. Its drive version is specified as a Position Indexer, which lets the controller execute stored motion sequences directly from internal memory and reduces reliance on an external controller for basic moves. Real-time communication with upper-level controls occurs via PROFINET RT, providing deterministic data exchange for synchronized multi-axis operation. The power stage accepts a three-phase mains input of 240 / 480 Vac 3~, allowing installation on low- or high-voltage plant grids without tap changes. Under continuous S1 duty, the inverter supplies a nominal motor phase current of 6 Arms, which indicates the continuous current available to the connected servo motor during steady operation.

During acceleration or sudden load impact, the drive can deliver a peak output of 18 Arms for up to five seconds, giving short-term current headroom for rapid indexing or brief overload events. The hardware extension is None (rev 8+), so no auxiliary option card is included for this configuration. The S1 rated input power is 4.49 kVA, so incoming supply components and enclosure cooling must support that continuous demand. Mechanical integration is simplified by a mass of only 2.7 kg, which helps keep panel weight low and supports easier handling during installation in tightly packed control cabinets.