Product Description:

The AKD-P00607-NBEC-0069 is a digital servo drive produced by Kollmorgen and supplied within the AKD Servo Drives series. It regulates three-phase permanent-magnet servomotors in closed-loop motion axes, providing speed, torque, and position control for packaging equipment, material-handling systems, and other industrial machinery. By combining power electronics and motion control in one enclosure, the unit supports compact panel layouts while maintaining precise response to commanded moves. Closed-loop regulation also helps connected axes hold the intended speed and position as load conditions change during operation.

As a Position Indexer version, the drive stores incremental move profiles internally so that a motion sequence can be executed from a single digital command without external interpolation. Network integration is handled through EtherCAT, which allows cyclic synchronization with a master controller at very short update intervals. This internal indexing approach can simplify machine sequencing because basic move execution remains inside the drive. During continuous operation, the amplifier supplies a nominal phase current of 6 Arms. For rapid acceleration or short shock loads, it can deliver up to 18 Arms for 5 seconds before returning to the nominal value. The power section accepts a three-phase mains input of 240 / 480 Vac 3~, allowing use on common 240 V or 480 V plant power systems.

At a continuous duty rating of 4.49 kVA, the input stage is sized for mid-range motor loads and steady production cycles. The electronics are built for revision 8 and higher. This version has no hardware extension slot, so its feature set remains limited to the onboard functions. With a shipping mass of 2.7 kg, the chassis stays light enough for DIN-rail or panel mounting without additional structural support. The low weight also helps when the drive must be installed in compact enclosures with limited space around adjacent components.