AKD-P00607-NBEC-0000

Product Description:

The AKD-P00607-NBEC-0000 from Kollmorgen runs as part of the AKD Servo Drives lineup and handles fast, high-power servo tasks in compact systems. Power output is rated at 6.7 kW, which is plenty for mid-to-heavy loads in motion setups. It handles a 3-phase input between 208-480 VAC; no jumper switching is needed. Uses forced air for cooling—needs airflow in the panel, or else temperatures rise fast. The outer casing is IP20, so it's not touch-safe without a cabinet. It mounts vertically, standard drive-style. Height is 326 mm, width 75 mm, and depth 235 mm.

Peak current hits 39.9 A during quick loads, with continuous current at 13.3 A. The built-in EtherCAT interface supports fast-cycle servo loops and also has Ethernet plus RS232 for configuration or logging. Interface options handle modern automation well. Compatible with multiple feedback types—EnDat 2.2, BiSS, SFD, Hiperface DSL, and incremental encoders—so retrofit flexibility is there. No extra module is needed for feedback inputs. Cooling pulls air across the fins, so avoid placing it tight against a panel wall. Machines running continuously benefit from components like this due to low upkeep needs, fast response times, and consistent output even under load fluctuations.

It runs best from 0 °C to 40 °C; full performance is within that range. Above that, derating kicks in. Designed for industrial automation, it is not meant for outdoor or sealed enclosures without cooling assist. The part handles fast cycles, clean movement, and aggressive stop-start tasks without pulsing issues. It is not oversized, nor underbuilt, and sits in the middle of the performance range for AKD series drives. Better fit for machines needing fast feedback and stable torque without complex setup trees or external interface cards. Just wire it up, set the feedback, and it runs. Simple core, solid edge IO, no fluff.