Product Description:

The AKD-P00607-NBAN-000 is a digital servo drive produced by Kollmorgen as part of the AKD Servo Drives series. Designed for cabinet installation, it converts three-phase mains power into regulated motor currents and executes indexing moves for single-axis machinery. In automated assembly cells, packaging lines, or material-handling stations, the unit supplies closed-loop velocity and position control so the matched servo motor follows programmed motion profiles with repeatable accuracy. The drive supports basic homing, incremental positioning, and registration capture, allowing the connected controller to request deterministic moves through simple I/O while keeping axis-level motion tasks inside the drive.

For continuous duty, the drive supplies a nominal current of 6 Arms, allowing medium-frame synchronous motors to reach rated torque without overheating. During acceleration or short overload intervals, it can deliver up to 18 Arms for five seconds, a margin that helps overcome inertial loads. The power stage accepts a line voltage of 240 / 480 Vac 3~, so the same model works on both low- and high-voltage factory mains. At that input, it draws a sustained apparent power of 4.49 kVA under S1 duty. The internal motion core is the Position Indexer variant, which stores move tables locally and executes them without a separate PLC.

Communication with supervisory equipment is through an analog command interface, enabling speed or torque reference signals when fieldbus traffic is unnecessary. The drive has no hardware expansion slots in revision 8 and later, which reduces depth and simplifies cabinet layout. The enclosure weighs 2.7 kg and uses the standard-width heat-sink frame, which helps maintain predictable panel spacing. Because the control, power, and feedback connectors remain on the front face, wiring can be completed without disturbing adjacent modules. This layout is useful in tightly packed cabinets with limited side access.