Product Description:

The AKD-P00607-NAEC-1000 servo drive is manufactured by Kollmorgen and belongs to the AKD Servo Drives series. It is intended for industrial automation cells that require real-time motor regulation. Acting as the power and control interface between a three-phase mains supply and a brushless servo motor, the unit closes torque, speed, and position loops to keep machine axes synchronized with the controller. Typical applications include feeders, form-fill-seal stations, and assembly robots where precise cycle timing and compact cabinet layout are important. Its closed-loop operation helps maintain consistent axis response during changes in load and motion demand.

This model uses Position Indexer control, so sequence tables and absolute position targets can be executed without an external motion card. Command data moves through EtherCAT, which provides deterministic communication with PLCs, I/O, and safety devices through distributed clocking. Under continuous duty, the power stage delivers 6 Arms of current, and it can supply 18 Arms for up to five seconds during short acceleration demands. The power section accepts a 240 / 480 Vac 3~ line supply, allowing the same drive to operate on low- or medium-voltage factory mains. This arrangement supports coordinated motion while reducing the need for separate external control hardware for simple indexed moves.

No plug-in option boards are fitted, and the unit uses revision 7 base hardware. At rated duty, the converter draws 4.49 kVA, which is useful when selecting upstream protective devices and panel wiring. Cabinet layout is also supported by a mass of 2.7 kg, which suits direct mounting on a DIN rail or mounting plate. The base configuration keeps the hardware layout straightforward and leaves the drive in its standard integrated form. Its compact physical setup also helps when panel space is limited or when multiple axes must be installed close together.