Product Description:

The AKD-P00607-NACC-E000 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. It performs closed-loop motion control in industrial automation systems and operates as a position indexer that can execute incremental move commands without an external PLC axis card. Designed for cabinet installation, the unit accepts three-phase AC power and communicates with higher-level controllers over EtherCAT or CANopen fieldbus networks. This arrangement allows the drive to handle local motion tasks for equipment such as conveyors, positioning modules, and automated handling axes while remaining suitable for compact control cabinets.

Mechanical dimensions are 70 mm wide, 185 mm deep, and 256 mm high, allowing tight panel layouts while still leaving space for airflow around the housing. The drive delivers a nominal current of 6 Arms and can supply a peak output of 18 Arms for up to five seconds to handle short acceleration demands. A pulse-width modulation stage switching at 8 kHz modulates the inverter output and helps limit audible noise during operation. Incoming power is drawn from a symmetrical three-phase source rated at 240 / 480 Vac 3~, and continuous S1 operation requires up to 4.49 kVA. These electrical characteristics allow the drive to support steady running conditions as well as brief load increases during indexed motion.

Control loops refresh rapidly, with the position loop closing every 271 µs and the velocity loop updating every 62.5 µs to support accurate following behavior. Fast loop updates help the drive respond quickly to changing load conditions during indexing, speed changes, and settling after a commanded move. Thermal performance is managed by convection, and the unit dissipates 129 W of heat at full electrical load, so enclosure ventilation must carry that heat away. Overall mass is limited to 2.7 kg, which simplifies mounting on DIN rails or backplates. The combination of rapid control updates, convection cooling, and moderate weight makes the drive practical for dense cabinet installations that require precise servo response.