Product Description:

The AKD-P00606-NCEC-0000 is a servo drive manufactured by Kollmorgen and supplied within the AKD Servo Drives series. As a stand-alone motor controller, it converts single- or three-phase AC power into regulated output for synchronous or induction servo motors, allowing precise velocity, torque, and position control in automated machinery. By integrating drive electronics and motion functions in a compact housing, the unit handles low-level axis control within the drive rather than in the PLC. This arrangement suits packaging, printing, and material-handling lines that need accurate motion from a compact controller.

The drive version is the Position Indexer, so the unit can execute internal motion sequences and position tables without external interpolation. For real-time networked control, it offers EtherCAT connectivity, which carries cyclic setpoints and feedback over deterministic Ethernet for coordinated axis updates. A wide 120 / 240 Vac 1~/3~ input range accepts either single-phase or three-phase mains, so the same hardware can be used on laboratory benches or plant power systems. Under continuous duty, the inverter delivers 6 Arms of nominal output current, which is suitable for medium-frame servo motors in the 750 W class. During acceleration or load shock, it can produce 18 Arms for five seconds, giving additional headroom to overcome inertia without oversizing the motor.

The hardware supplied to North American customers follows the Standard USA customization, so connector pinouts, safety labeling, and parameter defaults align with local code requirements. Its thermal design and power components are rated for a continuous apparent power of 2.38 kVA, supporting full current at elevated ambient temperatures without derating. Despite that capacity, the chassis weighs only 1.1 kg, which helps when the drive is mounted in small control panels or mobile test setups.