Product Description:

The AKD-P00606-NCCN-0000 is a servo drive produced by Kollmorgen for the AKD Servo Drives series. It accepts single-phase or three-phase mains and delivers precisely modulated current to a synchronous or induction motor, enabling accurate axis movement in pick-and-place stations, web handling equipment, and other automated cells. By providing closed-loop regulation and onboard safety monitoring, the unit forms the electrical link between feedback devices, PLC motion commands, and the mechanical load, supporting repeatable positioning and consistent cycle performance in industrial environments.

The drive operates from a rated line of 120 / 240 Vac 1~/3~, allowing installation in facilities with either single-phase utility feed or three-phase plant power. Under continuous duty, it supplies a nominal phase current of 6 Arms, which is the maximum steady-state motor winding current without derating. For short acceleration bursts, it can source up to 18 Arms for five seconds, giving extra torque to overcome inertia. Input power consumption is capped at 2.38 kVA in S1 operation, which is used for cabinet thermal planning and circuit protection. Motion and diagnostic data exchange occur through the integrated CANopen fieldbus, allowing standardized PDO and SDO mapping to higher-level controllers.

The drive is supplied in the Standard USA customization, so its connectors, markings, and EMC filtering match North American installation practices. It uses the Position Indexer version, allowing the unit to execute point-to-point moves from an internal sequence table without a separate motion card. As part of the AKD Servo Drive platform, it uses common parameter structures and accessory compatibility found across the product line. The housing weighs 1.1 kg, which supports dense panel installation and keeps added mass low where compact mounting is required.