Product Description:

The AKD-P00606-NCAN-0000 belongs to the AKD Servo Drives series produced by Kollmorgen. It is a servo drive used to energize and regulate brushless servo motors in positioning, conveying, or indexing stations inside automated cells. By converting incoming AC power into a precisely modulated output, the unit closes the control loop between the machine controller and the motor’s electromagnetic field, delivering dynamic torque and speed commands for repeatable motion profiles in industrial automation. This makes it suitable for axes that require coordinated starts, stops, and speed changes during repetitive machine cycles.

This model uses the Standard USA customization variant, which aligns with North American installation practices. Internally, the drive is configured as a Position Indexer, so it can execute stored position tables without an external motion card. That allows basic indexing and point-to-point moves to run inside the drive for compact machine layouts. Command signals are handled through an Analog interface, which simplifies integration when only ±10 V velocity or torque references are used. Under continuous load, the power stage supports 6 Arms of output current, while brief acceleration bursts are accommodated by a 18 Arms crest capability for five seconds. To supply that energy, the rectifier draws a maximum apparent power of 2.38 kVA.

The input section is rated for 120 / 240 Vac 1~/3~, allowing either single-phase or three-phase supplies to be used without hardware changes. Once installed, the standard-width housing weighs 1.1 kg, so the drive can mount directly on DIN rail without additional panel reinforcement. Its low weight is useful in narrow control cabinets where rail-mounted components share limited support area. The compact form also reduces load on slide-out mounting plates and leaves more space for adjacent control hardware. The drive remains compatible with Kollmorgen programming tools and safety accessories used across the AKD Servo Drives lineup.