AKD-P00606-NBEI-D000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
19 Seconds
The AKD-P00606-NBEI-D000 is a servo drive from the AKD Servo Drives series made by Kollmorgen. It features an Ethernet/IP fieldbus connection with a nominal current of 6 Arms and a peak output current of 18 Arms. The drive supports an input voltage of 120 or 240 Vac single or three phase and has a rated input power of 2.38 KVA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00606-NBEI-D000 is a servo drive manufactured by Kollmorgen and belongs to the AKD Servo Drives series. In an automation cell, this unit acts as the power and control interface between the facility’s PLC and a permanent-magnet servo motor, delivering regulated current so the motor can follow commanded speed, torque, and position profiles. By combining power electronics, feedback processing, and communication in a single housing, it simplifies cabinet wiring and reduces setup time on motion axes that require repeatable positioning. This makes it suitable for indexing tables, transfer axes, and other servo applications that depend on stable closed-loop control.
The drive version is a Position Indexer, which lets the unit store position tables and execute them autonomously after a fieldbus trigger. Network integration is handled through Ethernet/IP, allowing real-time exchange of set points, status words, and diagnostic data with industrial controllers. Because the indexing function is built in, simple move sequences can be handled inside the drive after a network command. The nominal current is 6 Arms, while the drive can deliver up to 18 Arms for five seconds to cover acceleration spikes or brief overloads. The power stage accepts 120 / 240 Vac 1~/3~, so the same model can be wired to single-phase outlets or three-phase mains. No additional I/O board is installed, so the footprint remains identical across revision 8 and newer units.
Total energy drawn from the mains during continuous operation is limited to 2.38 KVA, a value used to size upstream fusing and cable gauges. At 1.1 kg, the standard-width housing places little mechanical load on DIN rail segments. Its low mass and compact format also help when multiple drives are mounted side by side in a control cabinet. The customization variant is Standard EU German, which reflects regional defaults and conformity markings for that market. The drive uses the AKD Servo Drive platform, so connectors and diagnostic access remain consistent across the range and mixed-power axes can be managed through a single software environment.
Frequently Asked Questions about AKD-P00606-NBEI-D000:
Q: What is the nominal current output of the AKD-P00606-NBEI-D000 servo drive?
A: The AKD-P00606-NBEI-D000 nominally delivers 6 Arms of current for sustained operation.
Q: What fieldbus connectivity does the AKD-P00606-NBEI-D000 support?
A: This servo drive supports Ethernet/IP connectivity for integration with industrial networks.
Q: What is the peak output current for the AKD-P00606-NBEI-D000 servo drive?
A: The AKD-P00606-NBEI-D000 can reach a peak output current of 18 Arms for up to 5 seconds.
Q: Which drive version is featured in the AKD-P00606-NBEI-D000?
A: It is a Position Indexer drive version, designed for precise index-based motion applications.
Q: What is the rated supply voltage for the AKD-P00606-NBEI-D000 servo drive?
A: This model operates with a rated supply voltage of 120 or 240 Vac, single-phase or three-phase.
