Product Description:

The AKD-P00606-NBCN-0000 is a single-axis servo drive produced by Kollmorgen within the AKD Servo Drives series. In an automation cell, the unit sits between the mains supply and a synchronous or induction servo motor, converting utility power to regulated three-phase output while executing position, velocity, and torque commands from the control system. By integrating drive electronics, safety relays, and feedback processing in a compact package, it provides motion control for packaging lines, pick-and-place gantries, and similar electromechanical assemblies. This arrangement lets one cabinet-mounted unit manage power conversion and closed-loop motion functions for a single axis.

Its power stage accepts line sources at 120 / 240 Vac 1~/3~, allowing connection to common single-phase or three-phase panels without autotransformers. Under continuous duty, the inverter delivers 6 Arms to the motor, and for transient acceleration it can supply 18 Arms for up to five seconds, letting machinery overcome inertial peaks without oversizing components. The front-end rectifier is sized for 2.38 kVA of apparent input power, aligning the input demand with the stated current capability. Command and diagnostic data move over CANopen, so the drive can communicate with PLC-based motion systems and distributed control networks. The model is supplied without an auxiliary extension module, so the internal expansion bay remains unused.

The drive uses the Standard USA customization, which matches regional code requirements and default parameter units. Motion generation is handled by the Position Indexer version, enabling internal point-to-point moves that close loops at the drive rather than at the PLC. Internal indexing also reduces the amount of cyclic motion data that must be sent from the master controller during simple repeat moves. The housing weighs 1.1 kg, which helps keep cabinet load low when several axes are mounted together.