Product Description:

The AKD-P00606-NAEI-0000 is a digital servo drive produced by Kollmorgen within the AKD Servo Drives series. It integrates power conversion and motion control so it can command servo motors without external regulators. The unit accepts line power, processes feedback, and issues precise torque, velocity, or position commands for indexing tables, pick-and-place gantries, and other automated axes in manufacturing cells. This arrangement keeps the axis package compact because motor control, feedback handling, and power switching are managed in one housing. Internal loop control also helps the drive respond quickly to changing load conditions during repetitive motion.

The unit uses the Standard USA configuration, which aligns the drive with North American installation requirements. It uses the Position Indexer version, so motion sequences can be programmed directly in the drive instead of relying only on an external PLC. Communication with higher-level equipment takes place over Ethernet/IP, allowing cyclic data exchange on common industrial networks. The hardware is listed as rev 7 with no expansion boards, which keeps the package at the baseline footprint. Continuous motor excitation is supported up to 6 Arms of output current for steady-state operation.

For short acceleration demands, the drive can deliver 18 Arms for up to five seconds, providing extra torque when the axis must overcome load inertia or recover speed quickly after a dwell. To support that output, the power section is rated at 2.38 KVA under S1 duty. The input range of 120 / 240 Vac 1~/3~ allows operation from either single-phase or three-phase supplies, which can simplify integration into different plant power systems. Despite this electrical capacity, the enclosure weighs only 1.1 kg, which helps in compact cabinet layouts and on mobile control panels. The low mass also reduces mounting load on enclosure back panels where several drives are installed side by side.