Product Description:

The AKD-P00606-NACC-E000 is a servo drive manufactured by Kollmorgen within the AKD Servo Drives series. This unit acts as the power and control interface between a motion controller and a servo motor, translating low-level command signals into regulated three-phase output that governs torque, speed, and position in automated machinery. It is intended for coordinated motion tasks in automated equipment where stable closed-loop control is required during indexing, speed regulation, and point-to-point positioning.

The drive is supplied in the Position Indexer version, so it can close a position loop without an external PLC. Communication with supervisory controls is provided through EtherCAT & CANopen, allowing synchronized motion commands and diagnostic feedback on a shared network. The continuous output capability is 6 Arms, which is the maximum RMS motor phase current it can deliver continuously without thermal derating. For short acceleration bursts, the unit can source 18 Arms for five-second intervals, giving additional current for dynamic moves. Line consumption is limited to 2.38 kVA, which simplifies circuit sizing in the control panel. The accepted mains range is 120 / 240 Vac 1~/3~, so the drive can operate from either single-phase or three-phase supplies commonly found in light industrial panels.

The language setting is Standard EU English, so on-screen menus use that configured language option. The hardware revision is rev 7, and the unit is supplied without supplemental I/O or encoder expansion boards. With a mass of 1.1 kg, the drive supports dense mounting on DIN rail without adding much load to the back panel. Its standard-width housing also helps conserve cabinet space when several axes are installed side by side, and the compact layout keeps control panels orderly in multi-axis systems.