AKD-P00606-NACC-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Kollmorgen AKD-P00606-NACC-0000 AC servo drive is a position indexer drive with EtherCAT and CANopen connectivity options. The drive doesn’t have extension options.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00606-NACC-0000 Position Indexer servo drive is a reliable and versatile digital servo drive from the house of Kollmorgen. It is one of the fastest servo drives in the market, characterized by the most accurate motion and the best throughput. The device features plug-and-play compatibility with Kollmorgen motors. The unit should be installed only in industrial plants that fulfill the requirements of the regional directives. When transporting the device, caution must be observed; it must be free of shocks. The drive is fitted with both the EtherCAT and CANopen fieldbus connectors. A software parameter (DRV.TYPE) allows the selection of the features supported by the drive; EtherCAT and CANopen cannot be used at the same time. Prior to putting the unit to active use, it must be checked for signs of damage or defect. The weight of the servo drive is 1.1 kg, its height is 168 mm and its depth is 156 mm. The bandwidth of the current controller is 2.5 to 4 kHz, the bandwidth of the velocity controller is 0 to 1000 Hz, and the bandwidth of the position controller is 1 to 250 Hz. The servo drive must not be disassembled for cleaning purposes. The unit should be decommissioned only after switching off the main switch and securing it against restarting. The servo drive is free from any type of hazardous substances. It has a STO (Safe Torque Off) digital input that features a single channel operating mode. The device must be installed only in machines that adhere to the required EC standards or directives. This servo drive is capable of controlling the holding brake of the associated motor in a drive system. The installation and service of the product should be done only after turning off the power supply.
Frequently Asked Questions about AKD-P00606-NACC-0000:
Q: Should the AKD servo drive be operated in a closed control cabinet?
A: Yes, the AKD servo drive should always be operated in a closed control cabinet.
Q: What is the recommended tightening torque of the PE block of AKD servo drive?
A: The recommended tightening torque of the PE block of the AKD servo drive is up to 1.7 Nm.
Q: Does the AKD servo drive have an internal regen resistor?
A: No, the AKD servo drive does not have an internal regen resistor.
Q: What will happen if the motor or amplifier of the AKD servo drive is not EMC-grounded properly?
A: If the amplifier or motor of the AKD servo drive is not EMC-grounded properly, there is a risk of electrical shock.
Q: What is the maximum continuous regen power of the AKD servo drive with its external resistor?
A: The maximum continuous regen power of the AKD servo drive with its external resistor is 1.5 kW.
