AKD-P00307-NCPN-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The AKD-P00307-NCPN-0000 is a Kollmorgen servo drive from the AKD Servo Drives series. It has a nominal current of 3 Arms and a peak output current of 9 Arms, with a rated input power of 2.24 KVA. The drive supports PROFINET RT connectivity and operates on a supply voltage of 240 or 480 Vac three-phase, weighing 2.7 kilograms.
Internal Product Review
The AKD-P00307-NCPN-0000 is a Kollmorgen AKD servo drive with a Position Indexer drive version. PROFINET RT connectivity and a 240 / 480 Vac 3~ supply make integration into modern motion systems straightforward. A 3 Arms nominal current with 9 Arms peak output current supports responsive servo performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00307-NCPN-0000 is a three-phase servo drive developed by Kollmorgen for the AKD Servo Drives series. The unit converts mains power into controlled AC output for a single servo axis and handles indexing, velocity, and torque loops used in automated conveyors, feeders, and robotic tooling. By closing the electrical loop between the PLC and the motor, it delivers accurate motion profiles that support repeatable production tasks in industrial automation. Integrated diagnostic LEDs simplify setup, and the compact housing fits into dense control cabinets. This makes the drive suitable for applications that require accurate starts, stops, and repeat positioning over frequent duty cycles.
The drive version is the Position Indexer, which means the motor can be moved to absolute positions without external interpolation. Communication with the host controller runs over PROFINET RT, so cyclic setpoints and diagnostic data travel on standard Ethernet with real-time determinism. The input stage accepts a 240 / 480 Vac 3~ supply, letting the same hardware operate on low- or medium-voltage plant feeders. Under continuous duty, the inverter supplies 3 Arms to the motor windings. During acceleration, it can source 9 Arms for five seconds, providing headroom for rapid moves and high-inertia loads. These current limits set the thermal load of the drive during operation and should be observed during system use.
At continuous load, the supply stage draws 2.24 KVA. The unit is delivered in the Standard USA configuration, so connectors, labeling, and safety features follow North American conventions. The unit weighs 2.7 kg, which supports DIN rail or back-plate mounting without dedicated reinforcement. Its narrow width leaves space for additional drives or contactors in crowded panels. This installation format also helps conserve panel space where multiple power and control devices share one enclosure.
