Product Description:

The AKD-P00307-NCEI-0000 is an AC servo drive built by Kollmorgen for the AKD Servo Drives series. In an automation cell, it converts fixed-frequency mains power into a variable, pulse-width-modulated output so that a connected motor can follow precise speed or position commands issued by the machine controller. By closing the current and velocity loops inside the drive, it relieves the PLC of high-bandwidth tasks and helps maintain repeatable motion profiles on gantries, indexing tables, or material-handling axes.

The drive operates from a three-phase input of 240 / 480 Vac 3~, letting the machine connect directly to common plant distribution voltages. At this input, the converter draws up to 2.24 kVA of apparent power under continuous S1 duty. Its continuous motor-side output is limited to 3 Arms; therefore, cabling, fusing, and thermal management can be sized for light- to mid-frame servomotors. For dynamic moves, it can deliver a short-term surge of 9 Arms for five seconds, supplying extra torque during acceleration or rapid index events without oversizing the unit. Command and diagnostic data move over Ethernet/IP, allowing straightforward integration with Ethernet-based control platforms while keeping cycle times low.

The drive uses the Position Indexer version, so target positions, velocities, and motion sequences can be executed locally from internal registers without constant fieldbus traffic. This model is supplied in the Standard USA customization variant, so parameter defaults, labeling, and EMC compliance follow North American conventions. The unit is part of the AKD Servo Drive product family, so mechanical dimensions and connector layouts match other units in that family. With a mass of only 2.7 kg, the drive can be panel-mounted without additional supports, which simplifies enclosure layouts and reduces inertia on swing-out door assemblies.