Product Description:

The AKD-P00307-NCCN-0000 is a servo drive produced by Kollmorgen and supplied within the AKD Servo Drives series. As a single-axis controller, it receives line power and conditions it for drive operation. It then delivers regulated three-phase output to a matched servomotor so that position, velocity, and torque can be commanded precisely in automated machinery. This arrangement supports accurate motion on axes that must start, stop, and hold position on command.

The drive is delivered in the Standard USA version, so its configuration follows North American conventions. Its control layer uses a Position Indexer, which stores motion profiles internally and executes them through digital or fieldbus triggers without requiring continuous host intervention. Communication with higher-level PLCs is handled through CANopen, giving access to cyclic and acyclic data objects for status, diagnostics, and command exchange. Continuous thermal loading is limited to a nominal current of 3 Arms, while short-term dynamics can draw up to 9 Arms for five seconds to overcome inertia or friction peaks. This lets the axis deliver brief bursts of torque during acceleration without changing the basic operating mode.

The power section is sized for a rated input of 2.24 kVA, so cabinet wiring, fusing, and heat dissipation calculations must accommodate this apparent power under S1 duty. Mains compatibility spans a wide plant infrastructure because the unit accepts 240/480 VAC, three-phase supplies without hardware changes, switching automatically between the two ranges through its rectifier and PFC stage. At only 2.7 kg, the chassis fits high-density panels and reduces load on DIN rail or backplate hardware. Cooling is provided by a front fan, which maintains internal temperatures below design limits during continuous operation. Diagnostic behavior and addressing remain consistent across related drive sizes, which helps keep system integration straightforward in modular production lines.