Product Description:

The AKD-P00307-NBPN-D000 is a servo drive manufactured by Kollmorgen and delivered within the AKD Servo Drives series. As a compact, panel-mount controller, it interfaces with a motion controller or PLC to regulate current and velocity in brushless servo motors used on pick-and-place gantries, labeling equipment, and similar automation axes. The unit forms the power conversion and closed-loop control stage between the low-level command source and the motor, supplying timed three-phase output that matches the commanded position profile while monitoring feedback for error correction.

The drive is supplied in the Standard EU German customization variant, meaning its labeling, default parameter set, and safety notices follow European conventions. Its firmware is the Position Indexer version, so the internal processor can execute absolute or relative point-to-point moves without a separate motion card. Network integration occurs over PROFINET RT, allowing real-time cyclic data exchange with Siemens-based PLCs at update rates suitable for high-precision axes. Under continuous S1 duty, the power stage delivers 3 Arms of output current, while transient overload capability rises to 9 Arms for five seconds to accelerate inertia or overcome friction during machine startup. These electrical limits affect compatible motor frame sizes and the thermal load of surrounding cabinet components.

The drive has no optional hardware (rev 8+), so it relies solely on its base I/O and encoder ports. When connected to a three-phase mains source, the converter absorbs 2.24 KVA of apparent power at full load and accepts line voltages of 240 / 480 Vac 3~, so a single model can be used on either low- or high-voltage mains systems without tap changes. A mass of 2.7 kg supports direct DIN-rail or bulkhead installation without additional support brackets.