Product Description:

Kollmorgen manufactures the AKD-P00307-NBCC-I000 servo drive as part of the AKD Servo Drives series. This unit regulates torque, velocity, or position on brushless servomotors and synchronizes motion with higher-level automation controllers. By integrating power conversion, axis control, and fieldbus interfaces in a single enclosure, the drive serves as a compact motion node in packaging, material-handling, or robotic systems that require coordinated multi-axis performance. It is well suited to machine sections where a local servo axis must respond quickly while remaining closely linked to the rest of the automation system.

The drive version is a Position Indexer, so it can store move profiles and issue time-critical trajectory commands without an external motion controller. For network integration, dual-port interfaces support EtherCAT & CANopen, enabling deterministic cycle times and straightforward device mapping on standard automation buses. The dual-port arrangement also supports line topology, which can simplify cabling between adjacent axes. During continuous operation, the power stage delivers 3 Arms, which is the sustainable phase current supplied to the motor windings. Short mechanical bursts can be handled with a five-second surge rating of 9 Arms before thermal limiting begins. The incoming three-phase input supply can be either 240 / 480 Vac 3~, allowing use in either low- or high-voltage panels.

The chosen regional build is the Standard EU Italian customization, which aligns labeling, default language, and safety coding with machinery intended for that market. No optional I/O or feedback add-on boards are installed in this baseline configuration, and the unit uses the rev 8+ platform. This keeps the standard control and power arrangement in place without added expansion hardware. When loaded to its nominal current, the converter draws a real input of 2.24 kVA, which is useful when sizing branch-circuit protection and cabinet cooling. Physical installation is simplified by the 2.7 kg mass, so the drive can be mounted on DIN rails or backplates without secondary supports. The modest weight also makes it easier to position the drive within compact control enclosures.