Product Description:

The AKD-P00307-NBCC-E000 servo drive is produced by Kollmorgen and belongs to the AKD Servo Drives series. This position indexer version outputs motion profiles directly to a connected motor, which suits standalone single-axis automation without a separate external motion module for basic profile generation. A Safe Torque Off circuit is integrated to remove motor torque when required by the safety chain. The unit is supplied in the standard EU English variant and includes an internal CE line filter. It is delivered without additional hardware extensions beyond revision 8, which keeps the configuration focused on base drive functions.

The aluminum housing is 256 mm high, 185 mm deep, and 70 mm wide, so several units can be mounted on a shared backplate while leaving room for cooling airflow. Incoming three-phase power at 240 / 480 Vac 3~ supports the main DC bus, and the drive draws 2.24 kVA under rated S1 duty. Motor terminals provide a continuous current of 3 Arms, which suits steady operation on light to medium servo axes. The digital position loop refreshes every 269 µs to help the controller correct following error quickly during commanded moves. A carrier frequency of 8 kHz keeps switching noise moderate without placing unnecessary thermal stress on the power stage. EtherCAT and CANopen ports support deterministic command and status exchange with higher-level control equipment.

During acceleration or load shock, the drive can deliver a peak output of 9 Arms for up to five seconds, and the velocity loop closes in 62.5 µs to maintain speed response during short overload events. Full-load operation releases 57 W of heat through the heat sink, while standby dissipation remains low enough to simplify enclosure ventilation planning. The assembly weighs 2.7 kg, so it can be mounted on standard 35 mm DIN rail hardware without extra support brackets in most cabinet layouts. Heat management remains important when several drives share one enclosure, because the released heat accumulates across the panel. Common applications include packaging, pick-and-place, inspection, and other single-axis machine sections that need a compact footprint and responsive motion.