Product Description:

Kollmorgen manufactures the AKD-P00306-NCCN-0000 in the AKD Servo Drives series for use as a compact power module in industrial automation. The unit converts incoming AC power to a controlled, sinusoidal output so a servomotor can deliver precise torque and velocity in packaging equipment, material-handling axes, or light assembly stations. Within a motion system, it receives position commands from a higher-level controller and executes them by regulating phase current, thereby linking high-resolution feedback with commanded motion profiles.

The drive accepts a rated supply of 120 / 240 Vac 1~/3~, allowing installation on either single-phase or three-phase plant mains. Under continuous duty, it draws up to 1.2 kVA, a value that helps with branch circuit protection and line filter sizing. Motor excitation is delivered through a nominal phase current of 3 Arms, which is the continuous current level available to the matched servomotor during normal operation. For short, high-demand moves, the power stage can deliver a peak of 9 Arms for five seconds, giving extra acceleration without requiring an oversized frame. Command and diagnostic data are exchanged via CANopen, enabling synchronized operation with PLCs and distributed I/O on the same fieldbus network.

The drive uses the Position Indexer version, so target positions, velocities, and dwell times can be stored locally and triggered through digital inputs or bus commands without an external motion card. The configuration is listed as the Standard USA variant, so default parameter sets and safety markings follow North American conventions. Cabinet space remains modest because the housing weighs only 1.1 kg and fits a standard-width heat sink profile. The unit is part of the AKD Servo Drive product family and is intended for use with Kollmorgen motor cables, feedback interfaces, and software tools used across the series.