Product Description:

The AKD-P00306-NCCC-0000 is a digital servo drive produced by Kollmorgen for the AKD Servo Drives series. It is intended as a stand-alone motion controller for small to mid-range axes, where it regulates current, velocity, and position for brushless servomotors used in industrial automation lines, pick-and-place stations, and packaging equipment. By combining power electronics and feedback processing in one compact enclosure, the drive delivers precise torque commands to the connected motor while exchanging control data with higher-level PLCs during coordinated machine operation. This arrangement supports responsive axis control in compact automated equipment.

In this model, the drive is configured as a Position Indexer, so target positions and motion profiles can be stored locally and executed without continuous host supervision. During steady operation, the power stage delivers a continuous phase current of 3 Arms, while short accelerations can raise the current to 9 Arms for as long as five seconds before protective limiting occurs. The power section can draw up to 1.2 kVA from the mains at full load, and it accepts 120/240 VAC, single-phase or three-phase input, which gives the unit flexible installation options in distributed control cabinets.

The controller is supplied in the Standard USA version, matching North American labeling and safety conventions. Real-time network access is provided through dual-port RJ45 connectors that support EtherCAT and CANopen, allowing deterministic cyclic data exchange with compatible motion systems and common IEC 61158 masters. The housing weighs 1.1 kg, which helps limit panel loading when several drives are installed side by side on a DIN rail. Its compact format also helps preserve the clearance needed for convection cooling in dense cabinet layouts.