Product Description:

The AKD-P00306-NBPN-I000 servo drive is manufactured by Kollmorgen as part of the AKD Servo Drives series. Delivered in the Position Indexer version, it can execute stored motion profiles without a separate PLC. PROFINET RT connectivity links the unit to higher-level controllers, and both an internal power supply and bus-sharing terminals simplify DC link wiring. It accepts 120 or 240 Vac single-phase or three-phase mains for packaging, assembly, and small material-handling axes that require precise position and velocity control. This allows basic motion tasks to remain inside the drive and reduces the need for external control hardware on compact machines. The Standard EU Italian customization applies regional labeling and language settings for that market.

Under rated load, the converter supplies a continuous phase current of 3 Arms, while acceleration peaks are covered by 9 Arms for five seconds. The input section is sized for 1.2 kVA and operates from 120/240 Vac, single-phase or three-phase mains. Power devices switch at 10 kHz, which helps limit ripple and acoustic noise. The velocity loop updates every 62.5 µs and the position loop every 270 µs, so following error remains low during dynamic motion. This response supports indexing, speed changes, and short positioning moves with stable control behavior. The front panel remains available for PROFINET diagnostics and I/O because no hardware expansion card is installed.

The housing is only 156 mm deep and 59 mm wide, and its 168 mm height supports dense panel layouts. At full power, the unit dissipates 31 W of heat, while idle loss drops to 20 W. Operation is permitted up to 85% relative humidity without condensation, and the 1.1 kg weight supports easy handling during installation. Passive cooling uses smooth aluminum sidewalls rather than bolt-on extenders. The compact housing fits panel layouts where enclosure space is limited.