AKD-P00306-NBEC-E000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen AKD-P00306-NBEC-E000 is part of the AKD Servo Drives series and is a Position Indexer drive with EtherCAT fieldbus connectivity. It has a nominal current of 3 Arms, a peak output current of 9 Arms, and a rated input power of 1.2 KVA. The drive supports a supply voltage of 120 or 240 Vac in single or three phase configurations and weighs 1.1 kilograms.
Internal Product Review
The AKD-P00306-NBEC-E000 is a Kollmorgen AKD servo drive built for precise motion control. Position indexer functionality and EtherCAT connectivity make the drive especially effective for streamlined machine coordination and fast network integration. A 9 Arms peak output current stands out as a strong advantage for dynamic servo performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-P00306-NBEC-E000 servo drive is manufactured by Kollmorgen as part of the AKD Servo Drives series. Designed for decentralized motion applications, the unit receives AC mains power, rectifies it, and supplies controlled three-phase output to brushless servo motors. In industrial automation, it functions as the actuator interface that translates position commands into precise shaft movement for packaging stations, pick-and-place axes, and light material-handling gantries. Its compact construction allows mounting inside small electrical enclosures without sacrificing performance.
The Position Indexer option provides an internal sequence table so target angles, speeds, and dwell times can be executed without an external motion controller. Real-time bus traffic is handled through EtherCAT, which supplies sub-millisecond synchronization among multiple axes and simplifies wiring by combining I/O and diagnostics on a single cable. The power section tolerates a broad mains range of 120 / 240 Vac 1~/3~, making the same model suitable for single-phase or three-phase plants. Under steady-state duty, it outputs 3 Arms, while a five-second surge capacity of 9 Arms lets the motor overcome inertial peaks during acceleration or rapid indexing moves.
Continuous apparent power is rated at 1.2 kVA, so the drive can sustain its nominal current without derating across the available carrier-frequency range. Installation load is low because the enclosure weighs only 1.1 kg, permitting direct attachment to a panel with minimal hardware. Expansion slots remain unused because the unit has no hardware extension on rev 8+, which keeps heat generation and footprint unchanged from earlier releases. The configuration tagged Standard EU English uses English parameter names, metric defaults, and European compliance settings to simplify setup for users in that region.
