Product Description:

The AKD-P00306-NBCC-0000 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. It functions as a compact motor amplifier that executes torque, velocity, or position loops for automation axes in packaging machines, material handling lines, and similar equipment. By converting AC mains into regulated output current, the unit supplies precise energy to attached servo motors and integrates seamlessly with motion controllers to close the overall system loop.

For North-American installations the drive is supplied in the Standard USA configuration, and its firmware is the Position Indexer version, enabling standalone indexing sequences triggered by I/O or fieldbus commands. Communication is available through EtherCAT & CANopen, so it can join distributed control networks without additional gateway hardware. During continuous duty the power stage provides a nominal output of 3 Arms; during acceleration or disturbance rejection it can deliver up to 9 Arms for five seconds. The input bridge handles a sustained apparent power of 1.2 KVA, matching the thermal design of the internal bus capacitors and semiconductors.

The unit accepts a mains range of 120 / 240 Vac 1~/3~, allowing single-phase or three-phase supply lines typically found in light industrial panels. Mechanical integration is straightforward because the electronics sit on a standard-width heat sink that brings the total mass to 1.1 kg, reducing load on DIN rails. No auxiliary daughtercards are fitted; the hardware extension is listed as None (rev 8+), which leaves the front slot open for future upgrades such as STO or additional I/O. Within the AKD Servo Drive family this model therefore balances moderate current capability, multi-protocol connectivity, and firmware-based motion features while remaining physically compact for densely populated cabinets.